L
Lagos
D-Mon zit niet stil !
Met nog meer leuke functies, het werkt nog niet maar dat komt vast wel goed
v.711a1
!!! Test only release !!!
This firm is uploaded for tests of new D+ MECMs.
Some usefull MHW modifications:
- RS232 logger added.
Open your favorite terminal programm and configure connected COM port as 19200-8-n-1.
Go to service menu (+/B) and press '7' to enter configuration menu. Here you can switch on/off ECM-EMM logging via embedded COM port.
Just press '2' to switch ECM logging and '3' to EMM logging. Arrived precam packets will be output on your terminal window.
Seems other is apparently.
- Marking of channels added. Press 'SERW' button to mark/unmark current watching channel. Channels marked during watching will be saved in flash at standby.
- Unified channel managment added. When you wish to make something with channel list (View List, Choice of favorite channels, Change numbering, Remove) you will see new universal panel.
Probably there will be some delay (it's necessary to compute the number of previously marked channels) about 1-2 seconds.
From appeared panel you may
- Mark/Unmark channel (status added at this mode will not be saved on standby);
- Add/Remove channel from favorite list;
- Set/Unset channel locked;
- Move all marked channels to desired place.
- Delete all marked channels.
Button NAV (excuse me, i prepared this panel for philips DSI175 box) is equal to SERW button for pioneers.
By pressing it you have possibiblity to mark a group of channels
- All radio (video_pid is FFFF) channels;
- All service (both audio_pid and video_pid are FFFF) channels;
- All channels of current transponder.
Button C allows to move all marked channels befor or after current (highlighted) channel. You have to mark at least one channel to have an ability to move it.
Swappping will swap 1st marked channel with current(highlighted) onr.
Buton D removes all marked channels. If no channels marked then current (highlighted) channel will be rremoved.
MHW by Dynamit (english interface).
Greate thanks Kabronsete for algorithms of D+ MECM processing and Trouboudou for logger considerations
Met nog meer leuke functies, het werkt nog niet maar dat komt vast wel goed
v.711a1
!!! Test only release !!!
This firm is uploaded for tests of new D+ MECMs.
Some usefull MHW modifications:
- RS232 logger added.
Open your favorite terminal programm and configure connected COM port as 19200-8-n-1.
Go to service menu (+/B) and press '7' to enter configuration menu. Here you can switch on/off ECM-EMM logging via embedded COM port.
Just press '2' to switch ECM logging and '3' to EMM logging. Arrived precam packets will be output on your terminal window.
Seems other is apparently.
- Marking of channels added. Press 'SERW' button to mark/unmark current watching channel. Channels marked during watching will be saved in flash at standby.
- Unified channel managment added. When you wish to make something with channel list (View List, Choice of favorite channels, Change numbering, Remove) you will see new universal panel.
Probably there will be some delay (it's necessary to compute the number of previously marked channels) about 1-2 seconds.
From appeared panel you may
- Mark/Unmark channel (status added at this mode will not be saved on standby);
- Add/Remove channel from favorite list;
- Set/Unset channel locked;
- Move all marked channels to desired place.
- Delete all marked channels.
Button NAV (excuse me, i prepared this panel for philips DSI175 box) is equal to SERW button for pioneers.
By pressing it you have possibiblity to mark a group of channels
- All radio (video_pid is FFFF) channels;
- All service (both audio_pid and video_pid are FFFF) channels;
- All channels of current transponder.
Button C allows to move all marked channels befor or after current (highlighted) channel. You have to mark at least one channel to have an ability to move it.
Swappping will swap 1st marked channel with current(highlighted) onr.
Buton D removes all marked channels. If no channels marked then current (highlighted) channel will be rremoved.
MHW by Dynamit (english interface).
Greate thanks Kabronsete for algorithms of D+ MECM processing and Trouboudou for logger considerations
