Originally posted by goka
14-04-2004 S emu yazilimi Interstar
Evet beyler,Buyrun asagidaki emu yazilimiyla seca ler eklendi.
Conax thor icin key edit eklendi
kendiliginden acilip kapanmasi sorunu hal edildi
Yalniz kirilmalar donmalar cogaldi.
Astradaki seca olarak su anda gosteren kanallar .
Conax keyleri editledim ama malesef acilmadi
belki yanlis yaptim acanlar buraya yazsin
Saygilar
Attachment: flash_rs232_0414_interstar.zip
Bovenstaand is een stukje tekst van de Turkse site, als iemand het vertalen kan? Ik begrijp wel de essentie van de posting.
Ik hoop dat ik dit stukje copy mag plaatsen van Duck.
Hoi gardas,hier in het Engels hoe het werkt als je de software wilt hebben moet je maar mailen.(Zeg maar welke je wilt hebben gewone of met digitale audio spdif)
Groetjes
Fener
Yazilimini atiktan sonra reset yapamaniz sartir.
kartlar normal olarak calisiyor sorun yok.
emu kulanimi nextle aynisidir keyleri elle girmekte aynidir.
asagida interstarin emusu icin kulanim talimati.
saygilar
1. Instruction for FTA emulation mode
- Goto Main menu and select the System setting menu, then press OK to enter.
- Select the Version and press OK to enter. Then you will see the below screen.
- Now press the 1, 9, 7, 3 keys on the numeric button of the RCU.
And you will see the below screen, with the Version indication with Green color.
- If you have seen the blinking of the Green Version indication, that means the receiver is now in the FTA emulation mode. (So, you can see the scrambled CH)
- When you want to set the receiver back to normal viewing mode (No emulation), then you can do the same procedure which will make the Version indication back to BLACK letters.
2. Provider (index) and CAS Key Edit for Emulation
- Please note that this Index and Key edit is only possible while the emulation mode is active.
- First, press the Mute button and then press the Exit button.
- Then you will be able to see the above Edit menu.
- Now, choose the CAS type which you want to make the index and key edit, then press the OK button to enter.
- In above case, the Viaccess has been chosen so you will be able to edit its provider index and its key.
- New provider and key addition : If you don?t find the provider name in the existing list then you can use the Red key and the following instruction to ADD the index and key of the new provider.
- You can also edit and Delete the existing Provider and its key by using the Green and Yellow key on the RCU.
- By pressing the Red key of the RCU, you can ADD the new channel provider.
- By pressing the OK button, you will be able to input the Hexa value key for the provider and its channel.
* If the Provider key is : 1 2 3 4 A E
? Press the : ?1? ?2? ?3? ?4? ?AUDIO? ?YELLOW? key on the remote control
- Above keys are used through out the all menu provided.
- If you want to rename the existing provider name, you can rename them through the above input window provided.
- If you want to delete the provider, the above Warning window will be displayed. Please choose and confirm to delete the existing
Anders maar deleten.
